Tools

- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

RockShox, 11.4115.129.010, Service Kit, Monarch Plus (does not include air can seals)

- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+

- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+

RockShox, 00.6815.066.020, Reverb post bleed tool

RockShox 30mm Seal Kit

RockShox Volume Reducer Kits

- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance

Lightest, Strongest most versatile portable tool! Reversible ratchet with Quick-Disc thumb wheel. Handle is a Prestalever Tire Lever! Carry only the bits you need w/trim-able bit carrier. Patented Ratchet Mechanism Stronger than all others. Patented 1/4" Bit Retention with Push-to-Remove Hole. Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm TORX: T6, T8, T10, T15, T20,T25, T30 Screwdrivers: PH0, PH1, PH2 1/8 flat, 3/16 flat

Attractive, durable foam-lined zipper carry case. Perfect for protecting your tool and keeping your bits within easy reach. 12 of the most common Bit sizes for bicycles are included inside. Weather-resistant case materials and impact protection make this the perfect case to add to your toolset-to-go. A complete pocket multi-tool! Three-way pocket Ratchet with Extension and T-Handle function, all in a compact, lightweight design to carry on your bike! The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove Pedals. A high quality, durable tool. Prestacycle T-Handle 3 way Ratchet is compatible with all tool bit sets from Prestacycle and all standard ¼ bits. The patented Ratchet head firmly holds bits in place without a magnet. Releasing the bit is simple with a finger-press into the hole on the top. The ratchet offers an easy to use thumb wheel to speed screw installation and removal. The ratchet reverse knob is easily accessible right on top of the tool. Highest quality bits Prestacycle offers the highest possible quality 1/4" hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4" hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. Specifications: - Carry-along pocket Ratchet with 1/4" bits set - Remove and install all kinds of Bolts and Screws on your Bike - Slimline 100mm Extension can also be 50/50 installed to use as a T-Handle. - Patented Reversible Ratchet with thumb wheel. - Heavy-duty design withstands up to 60Nm of force. - Uses standard 1/4" Hex bits of all sizes. - Dimensions 4.5" x 5/8" x 7/16" (119mm x 16mm x 12mm). - Tool weight (including extension) is only 88 Grams! - 12 piece Bicycle Tool Bits set - Precision tools in 12 unique sizes specific for bicycles - Hardened steel bits are non-marring on titanium and alloy bolts - Trim-able bit carrier for a custom tool-set to-go Sizes: - HEX: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm - TORX®: T10, T20, T25, T30 - SCREWDRIVERS: PH1

Attractive, durable foam-lined zipper carry case. Perfect for protecting your tool and keeping your bits within easy reach. 12 of the most common Bit sizes for bicycles are included. Weather-resistant case materials and impact protection make this the perfect case to add to your toolset-to-go. A complete pocket multi-tool! Grab the red handle and tighten or loosen screws and bolts all over your bike. The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove Pedals. Tighten each bolt to exact torque! When tightening, finish by pushing on the end-knob. As you tighten, the arrow on the knob will point to the current torque. When the arrow reaches the correct torque, stop tightening. You're done! A high quality, durable tool. Prestacycle TorqRatchet is compatible with all tool bit sets from Prestacycle and all standard ¼" bits. The patented Ratchet head firmly holds bits in place without a magnet. Releasing the bit is simple with a finger-press into the hole on the top. The ratchet offers an easy to use thumb wheel to speed screw installation and removal. The ratchet reverse knob is easily accessible right on top of the tool. The Patent pending Beam torque wrench hidden and protected inside the handle uses hardened alloyed steel and is rated in excess of 5000 cycles and can be re-calibrated by Prestacycle. Specifications - Carry-along pocket Ratchet with 1/4" bits set - 2~10Nm Torque Wrench all in the same tool! - Remove and install all kinds of Bolts and Screws on your Bike. - Finish tightening by pushing the Torque Knob until the arrow reaches your torque - Patented Reversible Ratchet with thumb wheel - Heavy-duty design withstands up to 60Nm of force - Torque scale on Both sides for upside-down use - Uses standard 1/4" Hex bits of all sizes - Calibrated accurate for over 5000 cycles of Torque tightening - Dimensions 5.25" x 11/16" x 7/16" (133mm x 17mm x 12mm) - Tool weight is only 68 Grams! - 12 piece Professional Bicycle Tool Bits set - Precision tools in 12 unique sizes specific for bicycles - S2 Nickel-plated Hardened steel bits are non-marring on titanium and alloy bolts Sizes: Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm TORX®: T10, T20,T25, T30 Screwdrivers: PH1

- Updated shape features smaller head profile for clearance and longer handle for control. - Superior material and heat treatment outlast the competition. - Precision laser cut design with ergonomic cushioned grip. Pedro's cone wrenches are made from 2mm thick, precision laser cut, heat-treated tool steel and are revered for outlasting many other "shop quality" cones wrenches. Pedro's designed each cone wrench to fit perfectly, protecting the hub and ensuring simple and safe usage for the mechanic. Each flat wrench also features a single-ended design with ergonomic cushioned grip to provide maximum leverage & comfort. The updated shape features a smaller head profile for better clearance and a longer handle for improved leverage and control. Backed by Pedro's lifetime warranty.

The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder

Metric Sliding T-Handle Hex Wrench - Updated design features increased tip and head clearances, improved indexing, large easy-to-read size marking, and color bands for quick size identification. - Premium S2 tool steel construction and three precision tips ready to tackle any task. - Three-position sliding t-handle design and extra-long extended leg offer the ultimate in speed, ergonomics, leverage, and versatility. Pedro's Master T Handle wrenches have quickly become a favorite of elite mechanics around the world. With a solid foundation to build on, each wrench has been redesigned from the ground up. The new wrenches feature unmatched tip and head clearances, improved sliding T indexing, large easy-to-read size markings, and color bands for quick wrench identification.

Having the right tool for the job is essential when working on modern bicycles. Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Working closely with each manufacturer, Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The Splined Bottom Bracket Socket is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, with any square 1/2" drive, or in a bench vise (each sold separately). For tough bottom bracket jobs, make sure to check out the BB Socket Holder (sold separately) designed to help hold the Splined Bottom Bracket Socket in place.

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

- 8-function fixed-gear multi-tool. - Made from 5mm thick heat-treated tool steel for strength and lasting performance. - Mounts to frame's bottle cage mount with included wing bolts. - 187mm (7.4in) length and ergonomic shape provide excellent leverage and comfort. - Features 4mm/5mm hex, 8, 9, 10, and 15mm box end wrenches, lockring wrench, and bottle opener. Even in dense cities, riders often find themselves far away from home or a bike shop. Having the right multi-tool can be the difference between reaching your destination on time or taking the longest walk of your life carrying a busted bike. Pedro's has drawn upon its experience making professional shop tools to design the Trixie, the ultimate multi-tool for the fixed-gear urban rider. Pedro's Trixie is laser cut from 5mm thick heat-treated tool steel for the ultimate in strength and lasting performance. The tool's 187mm (7.4in) length and ergonomic shape provide outstanding leverage and comfort. Best of all, the Trixie mounts to your water bottle mounts with included wing nuts ensuring you always have your tool when you need it. The Trixie features a 4mm/5mm hex bit in a rubber holder, 8, 9, 10, and 15mm box end wrenches, lockring wrench, and bottle opener, all backed by Pedro's lifetime warranty.

- Updated jaws work on track cogs, cog & bb lockrings, e-bike chainrings, and cassettes. - Updated adjustment knob features gear size indication for quick reference of the current tool setting. - Adjustable plier design securely locks in place ensuring positive engagement and preventing slippage. - Fits 9-23 tooth gear sizes and 40-46mm OD lockrings with opposing notches. Compatible with all multi-gear cassettes and all standard width cogs and e-bike chainrings. Visit pedros.com/chainfit for the latest compatibility information. The Vise Whip is simply a better solution for holding your cassette during removal and now also works on track cogs, cog & bb lockrings, and e-bike chainrings. This innovative tool was developed by Pedro's in close collaboration with legendary frame builder and cycling technical author Lennard Zinn. The Vise Whip is beautifully simple to use. Once you try it, you'll never go back to a chain whip again.

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Keep your work area tidy with Park's Bench Top Small Parts Holder. It's constructed from rugged stainless steel with a clear, acrylic hinged top that lets you see what's inside. It also includes 4 removable bins that are perfectly sized to hold small parts, cable end caps, grease and whatever other little items you can think of.

A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation. • Made of a rubber-like PVC • Cleans easily and looks great on any bench • Measures: 14.7” x 7” (38cm x 18cm)

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.

Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more

Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.

Park's FR-5 Cassette Lockring Tool fits most cassette lockrings from Shimano, SRAM, SunTour, Chris King, and SunRace. Made from heat-treated tool steel, the FR-5 features an extra-long splined body to prevent slippage and can also be used to remove and install Shimano disc brake rotors. The FR-5 requires the use a chainwhip tool (sold separately) to prevent the cassette from turning during lockring removal.

Park's FR-5G Cassette Lockring Tool fits most cassette lockrings from Shimano, SRAM, SunTour and SunRace. Made from heat-treated tool steel, the FR-5G features an extra-long splined body to prevent slippage and a guide pin to ensure the tool is in straight, preventing stripped lockrings. And, it can also be used to remove and install Shimano disc brake rotors. The FR-5G requires the use a chainwhip tool to prevent the cassette from turning during lockring removal.

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.

Park Tool's Derailleur Clutch Wrench is a small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee rear Shadow Plus (+) derailleurs and all previous Shadow Plus models.

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined and hard anodized 6061 aluminum handle.

What's your seatpost size again? Park's Digital Caliper accurately measures seatposts, head tubes, bearings, spoke diameters, etc. It's a precision instrument built accurate to 0.01mm with a stainless-steel mechanisms and a rugged composite body. The tool’s ability to measure in metric, decimal inch, and fractional inch makes it an indispensable home workshop tool. It features an automatic shut-off and comes with a protective sleeve and the battery.

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

Use as a self-contained grease gun by using the included canister or screw the pump on to any tube of Park Tool grease, anti-seize or assembly compound. Small tip opening ensures precise placement of lube in any application.

This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels.

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

The Handlebar Holder prevents the handlebars and front wheel from swinging to the side and banging into the frame when your bike is mounted in a repair stand. It fits handlebars up to 32mm and all frame tubes up to 50mm in diameter, so it works on almost any road or mountain bike and is sure to make every repair easier.

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

The strong, lightweight IB-2 features ten essential tools in the compact form factor of our unique I-Beam handle. Perfect for on-the-ride adjustment of brakes, handlebars, saddles, or derailleurs. With its compact size, the IB-2 is a perfect tool for the saddlebag, jersey pocket, or toolbox.

Take the guesswork out of installing cables, wires and housing inside the frame. The IR-1.2 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames. Kit includes four plastic-coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation. Newly updated to include a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole. Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits. Works with any size frame including tandems. A true time and frustration saver!

Park's MTB-3.2 Rescue Tool includes a 10-speed compatible chain tool; regular and Phillips screwdrivers; T10, T20, and T25 Torx drivers; 1.5, 2, 2.5, 3, 4, 5, 6, 8mm Allen wrenches; 8, 9, 10mm box wrenches; 3 spoke wrenches; a pedal wrench; a serrated knife; 2 tire levers; and a bottle opener. It's small and light for easy carrying and features durable stainless-steel and nickel-plated tools. Plus, its 3-piece design sports tough nylon handles for an excellent grip.

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.