Other
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
Allows the use of VALT springs with Fox coil shocks.
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
- Stack height: 9mm
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
Chrome housing end caps are durable and shiny.
- Bottle of 100
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6805 Bearing
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6802 Bearing
Dimension Seatpost Clamps
- Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm
- Weight: 34g
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M12 bolt, M27 self-extracting cap, and washers
- Dust-proof and waterproof rubber seal cover
- Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak
Seatpost lever and cable set for Giant's Contact Switch Seatpost
Features
- E-Bike specific kickstand
- Designed to handle the additional weight of battery assisted Giant bicycles
- Adjustable leg assures the perfect fit for all frame sizes
Fits:
- Road-E
- Quick-E
- Dirt-E
- ToughRoad GX-E
- Explore-E
- Vall-E
- Amiti-E
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
- For bikes without factory mounting plate (includes top plate and bolt)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
Use these stainless steel Jagwire disc brake shims to position a 6-bolt rotor in just the right spot.
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
Page 1 of 5
Next page