Other
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
Allows the use of VALT springs with Fox coil shocks.
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
- Stack height: 9mm
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
Chrome housing end caps are durable and shiny.
- Bottle of 100
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6805 Bearing
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6802 Bearing
Dimension Seatpost Clamps
- Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm
- Weight: 34g
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M12 bolt, M27 self-extracting cap, and washers
- Dust-proof and waterproof rubber seal cover
- Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak
Seatpost lever and cable set for Giant's Contact Switch Seatpost
Features
- E-Bike specific kickstand
- Designed to handle the additional weight of battery assisted Giant bicycles
- Adjustable leg assures the perfect fit for all frame sizes
Fits:
- Road-E
- Quick-E
- Dirt-E
- ToughRoad GX-E
- Explore-E
- Vall-E
- Amiti-E
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
- For bikes without factory mounting plate (includes top plate and bolt)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
Use these stainless steel Jagwire disc brake shims to position a 6-bolt rotor in just the right spot.
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with Shimano, SRAM, and KMC 11-speed chains
- Replacement roller kits for mrp guide systems (includes bearings and hardware)
- Lightweight version averages 20g less per roller (with hardware)
Replacement EBT screws close the bleed port on Magura brakes.
- Torque spec: 0.5 nM
- T25 head
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 10mm wide. This is the right size for most double-chainring setups with a bashguard. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
Profile Design's Gap Cap works with 1" or 1 1/8" steer tubes to keep your headset adjusted properly at all times. The composite wedges are a fantastic choice for carbon steerers, and at 30-45 grams, you'll keep the front end of your bike super light.
Replacement top caps for various RockShox suspension forks.
RockShox 32mm Seal Kit
RockShox Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference.
RockShox 32mm Seal Kit
RockShox 32mm Seal Kit
RockShox Volume Reducer Kits
Page 1 of 3
Next page