Filter By:
- Parts & Accessories (26)
- Wheels (20)
- Hubs (2)
- Rims (3)
- Spokes (6)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
Stainless spoke nipple flat washers from Whisky.
- .3mm Thickness
- Cold forged 304 stainless steel with rolled threads
- Lightweight 2.0mm/1.7mm/2.0mm double-butted form
- Nipples sold separately
- 172g (32 spokes @ 262mm)
- Bag of 50
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 187mm - 1 axle per bag
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
- Deep section Road racing, Triathlon, Commuting, Touring, Track racing, and Singlespeed rim for strength and aerodynamics
- Hollow core aluminum with machined sidewalls for improved braking
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles.
With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use.
“The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.”
Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch.
All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost.
The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes.
Baron S1 Wheelset
- Use: Plus Tire Performance, Adventure, and Trail
- Internal Rim Width: 35mm
- Optimal Tire Size: 2.8 to 3.2-inch
- Hubs: Stan’s Neo 32-hole Front, 32-hole Rear
- Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples
- Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else).
Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset.
What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release.
- For cross country riding and racing
- Industry standard durable, lightweight rims
- Bead Socket Technology (BST) for superior tubeless performance
- Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering
- Stronger and lighter low-profile sidewalls for quicker acceleration
- Compatible with standard tires when used with or without tubes
The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else).
The Crest wheelset now includes the much stronger and faster-engaging Neo hub system. The Neo's larger bearings and a stronger, stiffer, shoulderless axle offer unmatched strength and durability. Featuring four precision pawls simultaneously engaging a 36-tooth ratchet ring for super-fast 10-degree engagement, the Neo also offers a 100% CNC machined hub shell and tool-free disassembly. New SealLock end caps stay put and make wheel installation a breeze. And with a huge range of options, including Boost, there's a Neo hub to fit just about any bike.
Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset.
What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release.
- For cross country riding and racing
- Industry standard durable, lightweight rims
- Bead Socket Technology (BST) for superior tubeless performance
- Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering
- Stronger and lighter low-profile sidewalls for quicker acceleration
- Compatible with standard tires when used with or without tubes
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings.
- 26mm OD x 15mm ID
- 7mm thick
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed.
- 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration
- Chromed steel bearings
- Wide bearing stance and axle design reduces flex and adds durability
- Low drag main seal prevents contamination and reduces resistance
- Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock.
- Improves tension consistency and overall build quality
- Prevents spoke wind up
- Offers secure thread lock between spoke and nipple
- Prevents corrosion between spoke and nipple
- Can be used dry or as a slurry
- Works great with mechanically locking nipples
Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair.
Identifying your Hugo rim and selecting the correct valve stem:
Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim.
Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads:
MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher
Sta Tru Rear Wheels
- Single Wall rim
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 24-inch
- ISO Diameter: 507 / 24-inch BMX
- Valve: Schrader
- Tire Type: Clincher
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 27.5"
- ISO Diameter: 584 / 650b / 27.5"
- Front Axle: QR x 100mm
- Tire Type: Clincher
Sta Tru Rear Wheels
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 27.5"
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed
- ISO Diameter: 584 / 650b / 27.5"
- Tire Type: Clincher
- Rear Axle: QR x 135mm
Sta Tru Rear Wheels
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 650b
- Cassette Body Type: Threaded Standard 1.37" x 24tpi
- ISO Diameter: 584 / 650b / 27.5"
- Tire Type: Clincher
- Rear Axle: QR x 135mm
Sta-Tru Double Wall Front Wheels.
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 700c
- ISO Diameter: 622 / road / 29"
- Front Axle: QR x 100mm
- Valve: Schrader
- Tire Type: Clincher
Sta-Tru Double Wall Rear Wheels
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 700c
- Cassette Body Type: Threaded Standard 1.37" x 24tpi
- ISO Diameter: 622 / road / 29"
- Valve: Schrader
- Tire Type: Clincher
For modern disc brake bicycles, Shimano's E-THRU axles deliver ease of use and wheel fixing security thanks to quality materials and Shimano's internal cam mechanism.
- Weight saving design features a hollow axle
- Compatible with current dropout parts
- M12x1.5mm axle thread pitch
- 12x170mm, 1.5mm Pitch, 14mm Thread, Flat Washer
- OEM Thru-Axle Q/R Unit for Deore FH-M618 hub
These MTH 716 Conversion Caps allow your SRAM MTH 716 front hub to accept a 15 x 100mm thru-axle.
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them.
- Offset nipple bed for improved spoke tension balance and wheel strength/stiffness
- Tubeless ready with strong tire retention bead
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
Page 1 of 2
Next page