Pumps/Inflation

- Dual purpose pump with high-pressure mode for shock inflation and high-volume mode for tire inflation - Aluminum barrel - 1.5" gauge is rubber coated for impact protection - 1-2PSI micro adjust button - Includes Presta adaptor for tire inflation - Soft grip handle - Compact 10" (254mm) length makes this easy to take on every ride - Includes frame mount bracket, screws, and optional strap

High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose

Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: 5 tubeless repair plugs 2 Presta core valves Integrated valve core removal tool Small, strong plugger tool Alloy weatherproof storage capsule

Giant's Control Blast 1 CO2 Inflation Kit consists of an inflator head that fits Presta valves, a cartridge sleeve, and a 16-gram CO2 threaded cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.

This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading

The Airlift 220 is a single action mountain bike pump that is small enough to bring along on the trail. It features full-body alloy construction with a cross-hatch texturing for better grip in slippery situations. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Rubber seal holds pump handle in place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation. - Presta- and Schrader-valve compatible - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage - Maximum pressure 90 PSI/6bars - Approximate weight 4.6oz/130 grams - 10.5 inches in length (265mm)

The PFP-10 is a reliable floor pump that's equally at home in the garage, workshop or trailhead, with a long hose, extra-large foot pads and a giant easy-to-read gauge. The locking universal head automatically adjusts to fit both Presta and Schrader valve stems. - Compatible with Presta and Schrader valves - Maximum pressure: 160 PSI (11 bar) - One-year warranty — see Park Tool Limited Warranty

The Prestaflator ECO is designed with a medium flow trigger valve providing a perfect balance for inflation and seating tubeless tires. The dial pressure gauge lets you follow your progress visually. Designed for Bicycle Mountain & Road tires with a wide range of pressure requirements. Auto-Select Head Presta / Schrader auto-select head engages with a simple flip of the lever. Quick lever release minimizes air loss at disconnect. Quality Prestaflator is engineered specifically for the needs of bicycles and bicyclists. Only top quality materials are used for it’s components. We start with a cast Alloy body and give it a Nickel plated finish. The hose is made of reinforced PVC. It’s more flexible than rubber hoses and is rated for 300 PSI of continuous use. Smooth alloy clamps on the hose are more comfortable for use. The pressure gauge has a durable steel case covered with a rubber shock housing and offers accuracy with +/- 2%. The dial has a bicycle-specific pressure range of 12 Bar/174 PSI. It’s high enough to inflate any daily-use tire, but not excessive so the gauge is easy to read. Prestaflator – The Original Beware of fakes and cheap imitations sold by one-product sellers. These are not real brands that can stand behind your product. Prestacycle is the originator of the Prestaflator. We are a full-line Bicycle tools company providing the Cycling industry globally with world-class tool designs. Our R&D has created a proven design that we have consistently improved-upon through years of experience. Prestaflator is different… a high quality, serviceable tool… designed, built and warranted for use on Bicycles. Specifications: - 2" / Steel body dial pressure gauge. - 150 PSI (in 2 PSI increments). - 10.5 Bar (in 0.2 Bar increments). - Copper coil mechanism provides good accuracy. - Polymer Presta / Schrader auto-select head. - Engages any valve with a simple flip of the lever. - Presta AND Schrader - Quick lever release minimizes loss at disconnect. - Replaceable I/M compressor quick-release attachment. - Rubber pressure gauge housing for shock protection. - Cast alloy pistol grip handle with Nickel-plated finish. - Thumb-control pressure release button. - High-pressure hose for easy access on any wheel. Disclaimers Air compressor and air hose with quick release connector required for use – not included. Maximum air pressure is limited by your compressor’s capabilities.

Serfas’ High Pressure Mini Pump can inflate a tire up to 140 PSI, and the long barrel means fewer strokes to get your tire inflated. The Quick Draw head fits both Presta and Schrader valves. Plus, at 100 grams, you’ll hardly notice it’s there until you need it. • Quick draw head fits both Presta and Schrader valves • Aluminum body • Small size fits easily into jersey and small packs • Weight: 100 grams • PSI capacity: 140 psi

Quick Overview Replacement Pump Head - Original Pump Head Replacement For FP-T1 / FP-T2 Floor Pumps - Presta/Schrader Valve Compatible Early Model Floor Pump Compatibility: - TCPG (Replaces S-GREYSMRTHEAD) - TCPG Plus (Replaces S-GREYSMRTHEAD) - FP-200 Classic (Replaces S-GREYSMRTHEAD) - WFP-200 (Replaces S-GREYSMRTHEAD)

Quick Overview - Telescoping Handle Inflates High-Volume Tires Fast - Presta and Schrader Valve Compatible - Metal Alloy Body - Flip-Out Pump Handle - Frame Mounting Bracket With (2) Longer Allen Bolts Included Limited Lifetime Warranty Serfas® warrants to the original purchaser that your pump is free of defects in material, construction, and/or workmanship for the lifetime of the product. Features: - Telescoping Handle Inflates High-Volume Tires Fast - Dual Head – Presta/Schrader Valve Compatible - Metal Alloy Body With TPU Overmolded Grips - Compact Size Fits Jersey Pockets Or Small Packs - Frame Mount Bracket (Included) Can Mount Between Frame and Bottle Cage - (2) Longer Length Allen Mounting Bolts Included Specs: Dimensions: - Pump Length: Fully Telescoped Open w/ “T” Handle Deployed: 15 1/2? (394mm) Closed: 11? (279mm) - Barrel Diameter: 0.98? (25mm) - Capacity: 100 PSI - Weight: 205 Grams - Color: Black, Gray, Brushed Metal Alloy Body

Quick Overview - Telescoping Handle Inflates High-Volume Tires Fast - Presta and Schrader Valve Compatible - Metal Alloy Body - Flip-Out Pump Handle - Frame Mounting Bracket With (2) Longer Allen Bolts Included Limited Lifetime Warranty Serfas® warrants to the original purchaser that your pump is free of defects in material, construction, and/or workmanship for the lifetime of the product. Features: - Telescoping Handle Inflates High-Volume Tires Fast - Dual Head – Presta/Schrader Valve Compatible - Metal Alloy Body With TPU Overmolded Grips - Compact Size Fits Jersey Pockets Or Small Packs - Frame Mount Bracket (Included) Can Mount Between Frame and Bottle Cage - (2) Longer Length Allen Mounting Bolts Included Specs: Dimensions: - Pump Length: Fully Telescoped Open w/ “T” Handle Deployed: 17 7/8? (454mm) Closed: 10? (254mm) - Barrel Diameter: 0.98? (25mm) - Capacity: 100 PSI - Weight: 200 Grams - Color: Black, Gray, Brushed Metal Alloy Body

Serfas’ Half Stick Quick Draw mini pump is small enough to fit inside a jersey pocket or bag, and can inflate a tire out on the road up to 100 PSI. The Quick Draw head fits both Presta and Schrader. Plus, at 155 grams, you’ll hardly notice it’s there until you need to use it.

A CO2 inflator and mini tool in one! The Serfas ST-15i features 1.5, 2, 3, 4, 5, 6 and 8mm Allen keys. It also has Phillips and flathead screwdrivers, T25 and T30 Torx wrenches, tire levers, glueless patches and aCO2 inflator head (cartridges sold separately).

A CO2 inflator and full-featured mini tool in one! Serfas' ST-17i features 2, 4, 5, 6 and 8mm Allen keys. It also has Phillips and flathead screwdrivers, T25 and T30 Torx wrenches, and 3.23, 3.3, 3.45, 3.96mm spoke wrenches. In addition, it boasts a 10mm open end wrench, a chain breaker and a CO2 inflator head (cartridges sold separately). With all that, this small tool's capabilities are hardly mini.

Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.

Big volume barrel while Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta / Schrader / Dunlop with integrated dust cap - BARREL: Aluminum - THUMB LOCK / HANDLE: Plastic - CAPACITY: 60 psi / 4 bar - VOLUME PER STROKE: 81.4 cc (pull + push) - SIZE: 22.3 x 4.6 x 3.4 cm / 8.8” x 1.8” x 1.3” - WEIGHT: 126 g / 4.44 oz Added Features - Dual-action pumping head - Side mount bracket

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

Twin Turbo design allows for both high pressure and massive air volume all in one durable shop quality floor pump. - Push Pull stroke transfers air between two barrels for faster and more efficient inflation - Full Metal SmartHead with air release for Presta and Schrader valves - 3" top mounted air gauge rated up to 200 psi - Extra-long pump hose

Five highly reliable threaded 16g pro-quality cartridges inflate 700c tires to 100-125 PSI in seconds depending on tire width.